Skip to content

Help replace the led lighting under the cabinet

Help replace the led lighting under the cabinet

Help replace the led lighting under the cabinet

In my new house, the builder put under the LED lighting of the closet all working with a single switch in the kitchen. I want to replace the 3 sections with HomeKit tapes, but I wonder if anyone can connect to the existing wiring? 3 different zones are connected in the same way and all switch on / off a single switch. Each LED has two wires connected, but there are 4 wires in total, 2 are not just used and connected. Is there any way to use the existing wiring or use an adapter to use the 4 wires to supply power to a power brick on a lifx, Nanoleaf or shade tape? I would be willing to run 3 separate strips and hide the adapters under the cabinet if the existing cables could be used somehow. Any suggestions? https://i.imgur.com/GNyspdS.jpg