With the stock firmware on the Shelly 1L, I can control the light state with either the app or the physical light switch, although it doesn't seem to sync in certain situations where the switch itself is set to the off position. , then use the app to activate it. If I want to turn it off from the switch, I have to turn the switch on and off, then turn it off to turn off the light. In theory, in the settings, changing the type to EDGE should solve this problem, but I tried to set it in the Shelly iOS app, but it always returns to switching or apparently never saves changing the option. But this is not my problem, I flashed using https://github.com/mongoose-os-apps/shelly-homekit and the light switch appears in the Home app and works as expected, however the physical switch no longer responds when switched. Am I missing a setting for this to work? I went back to the stock firmware and was able to use the physical switch and the Shelly app, and the status was synchronized as expected. Ideally, I would like the best of both worlds to be able to control the light through the Home and the physical switch. Thank you in advance.