Even if your home isn't exactly built "smart," it's still possible to add HomeKit light switches without a neutral wire. Here's how. Leviton is one of many companies offering smart switching solutions that do not require a neutral wire. There are many ways to install a smart lighting system in your smart home. If your preference is to use smart light switches instead of smart bulbs, you may run into a major problem if you have an older home: the lack of a neutral wire. For those who live in a home built before 1985, there's a decent chance there are no neutral wires hiding behind your light switch. If you're not sure if you have one, a neutral wire is usually the white wire found in the wiring behind your light switch. These are fundamental to a smart light switch because a neutral wire continues to supply a small amount of current even when the switch is in the off position. This small amount of power allows the smart light switch to maintain a connection to your home's WiFi network, allowing remote control. Buying the Right Smart Light Switch for a Home Without a Neutral Wire If you removed your current light switch from the wall and haven't found a neutral wire, there is a way to still install a smart light switch that doesn't require new wires. First and foremost, you need a smart light switch that works without a neutral wire. Second, you need a bridge to make it work. The following brands all sell smart light switches and bridges that work without a neutral wire. We have the most experience with Lutron and think it is an excellent solution. In most cases, the bridge and light switch are sold separately. However, some brands, such as Leviton, do offer bridge and switch bundles. Installing Light Switches Without a Neutral Wire As far as installation goes, the process remains the same as any other smart light switch, with the added step of finding a good spot to connect your bridge. You will also need the app that corresponds to the brand of the switch you want to buy, as this is necessary to set up the smart aspect of the switch. As with any electrical installation, make sure you turn off the power to the switch you are replacing before doing anything else or you risk electrocution. As an extra precaution, you can also use a non-contact voltage tester to ensure no electrical current is flowing. Read more on Homekit.Blog